BYPKD - 48170 EPOXY STEEL RESIN

  • MSDS: BYPKD
  • Manufacturer: J B WELD COMPANY
  • Product Name: 48170 EPOXY STEEL RESIN
  • National Stock Number: 8040-00F044773
Product Identification

Product ID:48170 EPOXY STEEL RESIN
MSDS Date:02/26/1993
FSC:8040
NIIN:00F044773
MSDS Number: BYPKD

Responsible Party
J-B WELD COMPANY
1130 COMO ST
SULPHUR SPRINGS, TX 75483-5000
US

Emergency Phone: 903-885-7696

Info Phone: 903-885-7696

Preparer: U.S CHEMICAL & PLASTICS

Cage: GO279

Contractor
J-B WELD COMPANY
483 SULPHUR SPRINGS, TX 75483-5000 US

Telephone: 903-885-7696

Cage: GO279

Ingredients

CALCIUM CARBONATE, DOMOLITE, LIMESTONE, WHITING

CAS: 1317-65-3

RTECS: EV9580000

Fraction By Weight: 35-45%

ACGIH TLV: 10 MG/CUM (DUST)


STEEL MANUFACTURE, CHEMICALS *95-3*

CAS: 65997-19-5

Fraction By Weight: 15-20%


BISPHENOL A DIGLYCIDYL ETHER RESIN, EPOXY RESIN, EPON 820,

CAS: 25068-38-6

RTECS: KD4380000

Fraction By Weight: 40-50%


SILICA, AMORPHOUS FUMED (IARC CARCINOGEN - GROUP 3) *95-3*

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: 1-5%

OSHA PEL 0.1 MG/CUM

ACGIH TLV: 0.1 MG/CUM

Hazards

Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN/EYES: MAY CAUSE MINOR IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION.

First Aid

First Aid:SKIN: WASH W/SOAP & EXCESS WATER. EYES: FLUSH W/EXCESS WATER
FOR 15 MINS. INGESTION: DON'T INDUCE VOMITING. IF CONSCIOUS, GIVE A
GLASS OF WATER TO PERSON. INHALATION: REMOVE TO FRESH AIR. GIVE CPR
IF NECESSARY. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Flash Point Method:SCC
Flash Point:>200F
Extinguishing Media:CO2, DRY CHEMICALS, FOAM
Fire Fighting Procedures:WEAR SCBA. FIGHT LIKE A FUEL OIL FIRE.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS EXPOSED TO HIGH TEMPS
SUCH AS FIRE CONDITIONS MAY RUPTURE.

Accidental Release

Spill Release Procedures:WASH & CLEAN UP W/WATER & DETERGENT. PICK UP
W/INERT ABSORBENT & PLACE IN A CONTAINER FOR DISPOSAL.

Handling

Handling and Storage Precautions:STORE AT AMBIENT TEMPS.
Other Precautions:DON'T FLAME CUT, WELD/MELT EMPTY CONTAINERS.

Exposure Controls

Respiratory Protection:IF ROOM VENTILATION IS LACKING, USE NIOSH
APPROVED RESPIRATOR.
Ventilation:GENERAL ROOM/LOCAL EXHAUST. MECHANICAL (GENERAL):
ACCEPTABLE
Protective Gloves:NEOPRENE/EQUIVALENT
Eye Protection:SAFETY GLASSES/GOGGLES
Other Protective Equipment:EYE WASH FOUNTAIN & SAFETY SHOWER.
Supplemental Safety and Health

Chemical Properties

Vapor Density:>1
Spec Gravity:1.17
Evaporation Rate & Reference:(ETHYL ETHER = 1): <1
Solubility in Water:INSOLUBLE
Appearance and Odor:DARG GRAY/BLACK SMOOTH PASTE
Percent Volatiles by Volume:0

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS/ALKALIES
Stability Condition to Avoid:OPEN FLAMES, SPARKS & HIGH TEMPS
Hazardous Decomposition Products:CO, CO2

Disposal

Waste Disposal Methods:DISPOSAL METHOD MUST COMPLY W/LOCAL, STATE &
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.